Baslton Sample Filter Cartridge and Housing SelectionDisposable Adsorption Units (DAUs) contain a bed of adsorbent granules. Utilizing a wide choice of adsorbents, the DAUs selectively remove vapors from air and other gases.Because the adsorbed vapor remains trapped in the solid bed, the DAU has a fixed upper limit of total weight of vapor which can be captured. It is usually not feasible to regenerate the filter when it has reached its adsorption limit. DAUs should be used only when small quantities of vapor are to be removed.Considerations in Us

Baslton Sample Filter Quick Selection GuideBaslton Sample Filter Quick Select Guide:A: Coalescing: If the unit is used in the traditional in/out flow path with a drain connected the filter will function as a coalescing filter provided a "_X" type of element is used. B: Particulate: For particulate only removal the filter may be used in either flow direction and a "_Q", "_S", or "_H" type of element is used. C: Slipstream or BypassSampling: In this flow configuration the filter will allow a sample to be pulled from a flowin…

Baslton Sample Filter Flow Rates for Air and Gas FiltersBaslton Sample Filter Flow Rates for Air and Gas Filters: 9922-05,4433-05,9900-05,9933-05,8833-11，9922-11，9933-11，105S6，95A, 95M，95S6, 95T，91S6, 47S6，48S6，85，90，8800-12，31S6, 31G，30/12, 33S6，33G, 37/12，49S6，41S6, 41G，30/25，45S6, 45G，37/25，27/35，26/35，27/80，15/80S6

Baslton Sample Filter Flow Rates for Liquid FiltersBaslton Sample Filter Cartridge, Housing Selection/Flow Rates for Liquid Filters.For liquids with viscosity higher than the viscosity of water (1 centipoise), divide the flow rates in the above table by the viscosity of the liquid in centipoises. Example: For liquid with 10 centipoise viscosity, flow rate with Model 53/50 housing, Grade 50 filter cartridges at 5 psi (0.34 bar) drop will be 390/10=39 GPH (2.5 lpm). Flow rates for Model 15/80S6 are estimated.91S6, 97S6, 95M, 85, 37/12, 37/25, 27/…

Baslton Selection Cartridge, Housing|Chemical & Temper. ResistanceBaslton Filter Chemical and Temperature Resistance Selection，X-Type or Q-Type with Fluorocarbon Resin Binder ，S-Type with，PTFE Resin Binder，H-Type with Quartz Construction，LP Cartridge with Polypropylene Support.Balston sample 91S6, 97S6, 95M, 85, 37/12, 37/25, 27/35，27/80, 95S6, 95A, 48S6, 49S6, 105S6, 47S6，30/12, 30/25，95M/Monel，95S6, 85, 37/12, 37/25, 27/35, 27/80，All housings except 97S6, 30/12, 30/25, 8822-11, 8833-11, 95T，All housings except 97S6, 30/12, 30/25, 8822-…

Baslton Stainless Steel Sintered Metal FilterRemove solids and liquids from gas samples Remove solids from liquid samples Filtration efficiencies from 5 to 100 micron 316L stainless steel construction Long life, cleanable filter cartridges Temperature resistance to 400°F (204°F) Up to 200 psid (14 barg) (differential pressure)AdvantagesThe Balston Stainless Steel Sintered Metal Filter is suitable for applications which require a durable, low maintenance reusable stainless steel filter. The filter cartridge is constructed of 316 stainless

Baslton Vapor Adsorption CartridgesBaslton Vapor Adsorption CartridgesVapor Adsorption Cartridges Type CI Vapor Adsorption Cartridges contain a bed of adsorbent granules in the annular space between two Microfibre Filter Tubes, with permanently bonded end caps. Utilizing a wide choice of adsorbents, the Type CI cartridges selectively remove vapors from air and other gases. Flow direction is inside-to-outside through the cartridge, and the outer Microfibre Filter cartridge serves as an integral final filter to prevent carryover

Baslton Sample Filter Cartridge and Housing SelectionBaslton Sample Filter Cartridge and Housing SelectionFilter Cartridge DescriptionParker Hannifin filter division BALSTON supplies filter cartridges in three different designs: LP Cartridges, Sintered Stainless Steel Cartridges, and Microfibre Filter Cartridges (X, H, or Q-type). See Table 1 for descriptions:How To Select The Filter Cartridge1. When selecting a cartridge, do not overspecify. Select the coarsest grade which will adequately protect the instrument. Coarser grade filters provide lowe

Baslton Sample Filter Application RecommendationsBaslton Sample Filter Application RecommendationsAcid Plant Stack GasA frequently encountered sampling requirement is to analyze the gas composition in the exhaust from absorbers or scrubbers in acid manufacturing plants. The exhaust gas invariably contains droplets of dilute acid, which must be removed from the sample before it enters the analyzer. The recommendations are similar to those for natural gas sample filtration: Grade DQ or DX filter tube, inside-to-outside flow, and two stages of fi

Balston Sample Filter FunctionsBalston Sample Filter FunctionsCoalescing Filtration: Separating Liquids Draining Collected Liquid From GasesMicrofibre Filter Cartridges efficiently separate suspended liquids from gases. The micro fibers capture the fine liquid droplets suspended in the gas and cause the droplets to run together to form large drops within the depth of the filter cartridge. The large drops, forced by the gas, flow to the downstream surface of the filter cartridge, from which the liquid drains by gravity. This p

Balston Filtration and Air Drying Products Bulletin 2020Parker Hannifin Corporation,core motion and control technologies. These technolgies enable virtually every machine and process to operate accurately, efficiently and dependably. As the global leader in motion and control, we partner with our distributors to increase our customers’ productivity and profitability by delivering an unmatchable breadth of engineered components and value-added services. We continue to grow with our customers by creating application-focused products and system solu…

AS568 O-RingO-ring selection is based on chemical compatibility, application temperature, sealing pressure, lubrication requirements, quality, quantity and cost. Industry standard O-Ring sizes in accordance with AS568 dimensions are available or custom O-Rings of practically any dimension can be made to fit an application. Miniature o-rings, large special o-rings, continuously molded and spliced cord are just a few examples of the custom o-ring possibilities.Standard O-rings are made from a

Life SciencesThe life science market includes companies with very diverse manufacturing outputs.

Fluid Power Light MobileMountain bikes, cross country, downhill, trail, road, ATV, UTV, snow mobile, baja truck, or jet ski. If you’re riding it you’ll need to know you can keep control over the chop and brake reliably whenever you need it. Professional race-grade, high performance suspension and brakes need to do more with less: more rider sensitivity and control in smaller, lighter packages.As these platforms continue to be innovated, the old generic seal designs move from tried and tested solutio

What is an O-Ring and SealWhat is an O-Ring?An O-ring is a torus, or doughnut-shaped ring, generally molded from an elastomer, although O-rings are also made from PTFE and other thermoplastic materials, as well as metals, both hollow and solid. This handbook, however, deals entirely with elastomeric O-rings.O-rings are used primarily for sealing. The various types of O-ring seals are described in this section under “Scope of O-Ring Use.” O-rings are also used as light-duty, mechanical drive belts. More informa

Parker O-ring Selector OnlineParker´s O-Ring Selector is an engineering tool which offers O-ring material and size selection combined in one tool. Both are interlinked, thus ensuring the best possible combination of the calculated O-ring size and material choice. The O-Ring Selector covers both imperial and metric standards.Service Conditions & Material SelectorFind the most suitable sealing material by specifying your minimum and maximum Operating Temperature, the desired Polymer Group or Seal Hardness.The Advanced

Polyurethane (AU, EU)Polyurethane elastomers, as a class, have excellent wear resistance, high tensile strength and high elasticity in comparison with any other elastomers. Permeability is good and comparable with butyl.Heat resistance• Up to approximately 82°C (180°F)Cold flexibility• Down to approximately -40°C (-40°F)Chemical resistance• Pure aliphatic hydrocarbons (propane, butane)• Mineral oil and grease• Siliconeoil and grease• Water up to 50°C (125°F)Not compatible with:• Ketones, este

Polyacrylate (ACM)ACM(acrylic rubber) has good resistance to mineral oil, oxygen and ozone. Water compatibility and cold flexibility of ACMare significantly worse than with nitrile.Heat resistance• Up to approximately 177°C (350°F)Cold flexibility• Down to approximately -21°C (-5°F )Chemical resistance• Mineral oil (engine, gear box, ATF oil)• Ozone, weather and agingNot compatible with:• Glycol based brake fluid (Dot 3 and 4)• Aromatics and chlorinated hydrocarbons• Hot water, steam• Acid

Ethylene Acrylate (AEM, Vamac)Ethylene acrylateis a terpolymer of ethylene and methyl acrylate with the addition of a small amount of carboxylated curing monomer. Ethylene acrylaterubber is not to be confused with polyacrylate rubber (ACM).Heat resistance• Up to 149°C (300°F) with shorter life up to 163°C (325°F)Cold flexibility• Between -29°C and -40°C (-20°F and -40°F)Chemical resistance• Ozone• Oxidizing media• Moderate resistance to mineral oilsNot compatible with:• Ketones• Fuels• Brake fluid

Butyl Rubber (IIR)Butyl(isobutylene, isoprene rubber, IIR) has a very low permeability rate and good electrical properties.Heat resistance• Up to approximately 121°C (250°F).Cold flexibility• Down to approximately -59°C (-75°F ).Chemical resistance• Hot water and steam up to 121°C (250°F).• Brake fluids with glycol base (Dot 3 & 4).• Many acids (see Fluid Compatibility Tables in Section VII).• Salt solutions.• Polar solvents, (e.g. alcohols, ketones and esters).• Poly-glycol based hydraulic